Did you forget your Segway Ninebot ES2 Scooter password or you bought a secondhand scooter but forgot to ask the owner for the settings? Don’t worry; we have a way to resolve your issue so that you can enjoy the features of the Segway Ninebot ES2 scooter to the fullest.
By following a few of the steps, you will be able to get access to renew the password. Resetting the scooter will also resolve the problem of the scooter not being able to connect to Bluetooth. To all of these problems, there is a straightforward solution of factory resetting your scooter. Let’s see how to do it!
How To Reset Segway – Ninebot ES2 Scooter
Okay, so to reset the Segway Ninebot Es2 scooter is very easy; you can do it in two ways; the first method is to
- Turn the scooter unit on.
- You have a throttle lever on the left side of the scooter that is a speed throttle or an accelerator and a brake lever on the right side. Push them both down at the same time. If you cannot keep the balance, you can ask an additional hand for help to push one of the levers down. Make sure you do it at the same time, not missing a half-second.
- Keep pressing the throttles and turn off the unit.
- Release the throttle after turning off the device.
- Wait for five to ten seconds.
- Turn on the unit after all the steps, and you will see a new reset scooter.
Another procedure or method to reboot or factory reset your Segway Ninebot Es2 scooter is to:
- Start by turning off the unit.
- Again press the lever throttle and brake the lever downward. You can ask for another person’s help to do it effectively and smoothly.
- While holding down both of the throttles, turn the system on.
- Release both of the throttles and wait for 5 to 10 seconds
- Turn the unit off.
After reading both of the methods, you will realize they both are reversed versions of each other. So by applying any of the two methods to reset, you can successfully reboot or reset your scooters to their factory settings. Once you are done resetting, check on the Ninebot app; you will notice the app asking you for an update. A message will pop up indicating that “new firmware has been found, please update to the latest version.” Update the software and enjoy your fresh scooter setting.
Benefits Of Resting The Scooter
Resetting your Ninebot ES2 scooter doesn’t only help you with the password but also resolves tons of your scooter issues. Let’s discuss which issues you should consider resetting your Ninebot ES2 scooter.
Remove Hack CFW
If your Segway Ninebot ES2 scooter runs too slowly, rebooting it can surprisingly help you get the scooter run at high speed. Yes, by resetting the scooter, you can remove the CFW hack. CFW stands for custom firmware that means an altered version of the original software. By resetting the scooter, you will reset to its original speed that is 27 kilometers per mile. So rebooting your scooter is the way to speed up your scooter.
Resolve to Hang Up and Application Crashes
We all have been there; after using a device for a longer time or after getting a second hand device that is already used too much, we start getting the issue of application crashing, device hanging up, and freezing device issues. The solution to all these issues is a simple reset. By factory resetting any devices, it gets freed and cleans off the malware and viruses that cause all these issues.
Regain Default Functions
Time and again, it happens when you have kids in your house with the curious mind they put fingers everywhere. The chances are that they mess up your scooter setting, or it may also happen that you are unaware of what setting to put or not put on your device, and you end up messing up everything. But don’t worry, there is a solution to all the problems in this world, so is to this one. You can reset the device quickly and get back to the default setting of the device.
Connecting To BlueTooth
It is a very common issue that we get to hear that the Segway Ninebot ES2 scooter doesn’t connect to Bluetooth easily. This problem can happen due to a lot of reasons. There are many other solutions to fix this issue, but the most useful one that helps immediately is resetting your scooter, and trust me, it does work.
Erase The Information
The other way resetting your scooter can help you is to erase all the data on the device and the app. If you make the mind of selling your scooter or phone off, you can simply reset the scooter to its factory reset to erase all the personal data and settings out of it. The same goes for if you buy a new one from someone; you can reset it to erase their setting to insert your setting in the device.
What Is Factory Reset?
Before going into the step, you should know what factory reset is? Factory reset is a software restoration of any electronic device. It is a hard reset, meaning that all the information on the device will be deleted and restored to the one initially installed in it when it was manufactured. That is why you need to think twice before resetting your electronic device if you do not want to lose some valuable settings because, with a factory reset, everything gets erased. In your case, it is immensely going to help you because once you forget the password to the scooter, there is no other way to restore it than factory resetting your scooter.
Related Hoverboard Guides: How to switch modes on Hoverboard | How to reset the Swagtron Hoverboard
By reading this article, you will find out how easy it is to solve many of your scooter’s problems. Following these 4 to 5 steps, which take a maximum of 2 minutes to reset your scooter, can be useful. You can resolve your password issue, speed up your scooter, fix the connectivity issue, and change to its default setting by resetting the scooter to factory reset.