How Fast Do Hoverboards Go? – Top Speed & Safety Guide

Hoverboards have been the talk of the town for a long time available as the best alternative to bicycles and electric motorbikes. These units are renowned for their remarkable efficiency and outstanding output. The safety of hoverboards has also improved overtime.

How Fast Do Hoverboards Go?

The speed of the tool depends greatly on the condition of the road, the weight of the rider, and battery life. Different models of hoverboards have the potential to reach different speeds ranging from 6 miles/hour to 9.9 miles/hour. Thus, the type of board, along with its speed, can be selected depending on the rider’s expertise and requirements. Keep reading the article below for more information on how fast hoverboards can go.

Factors Affecting the Speed of Hoverboards

There are various factors responsible for the impressive operation and fast speed of a hoverboard, including the charging of the battery, condition of the road, rider’s weight, and expertise, etc. However, the most prominent among them is the weight carrying capacity of the item, which is the weight of the rider that the board is capable of pulling. Typically, the best electric hoverboards will perform better than others.

How Much Weight Can It Pull?

The speed of a hoverboard depends significantly on its weight carrying capacity and ability to pull a certain amount of weight. Most hoverboards have a weight limit above which they do not perform up to the mark and might slow down. Thus, it is highly recommended to consider your weight and the range of the apparatus before purchasing it. Similarly, not more than one person should ride the board at a time, as it might lead to performance inefficiency.

Placing the weight higher than the carrying capacity of the tool might lead to damage in the long term. You might also observe that a board with lighter objects will move faster than those carrying heavier objects. This is because it takes more effort for wheels to carry overloaded apparatus. Thus, Hovertrax boards are highly appreciated by consumers in this regard as they possess the ability to carry weight ranging between 176 lbs. to 225 lbs.

Road Condition

The second factor that affects the speed and performance of the material is the condition of the road where you are riding. Uneven and rough surfaces with plenty of obstacles will inevitably result in a reduction in the board’s speed. Similarly, it is advised to avoid downhill rides, as they might increase the speed of the board to a great extent. Eventually resulting in weight shift leading to disbalance.

Contrary to this, it is safe for consumers, especially novice riders, to ride on flat and even surfaces. It will help you maintain the optimum board speed without impacting the balance and thus, protecting you against injury from falling. Apart from this, you must not make your board into mud or water, no matter how tempting it might be. Doing so will damage your electrical gadget leading to a reduction in speed over the short and long term.

Battery Life

Last but not least, the power retention ability of the device is also essential and should be carefully considered for extraordinary output. It might take a long time to completely recharge the equipment once it runs out of power. Thus, you should carefully monitor your power cables and plugs regularly to prevent unwanted issues. Furthermore, the charging of the apparatus is directly linked to its speed.

A maximum charged battery will provide maximum speed and vice versa. Thus, if you want to ride at a fast speed, make sure to keep the gadget fully charged before you begin. The most famous tools available in the market are capable of offering an uninterrupted power supply of 45 minutes. Notable examples of such items include Hovertrax DLX 2.0 and Hovertrax 2.0.

Can You Make Hoverboard Go Faster?

Most hoverboards are available with fixed speed ratings. However, you can adjust them depending on your requirements and control over the equipment. It is not difficult to modify the speed of a hoverboard, and thus, the modification can be carried out at your home by yourself.

Below mentioned are the steps that could be taken if you possess a Jetson Strike Hoverboard. Similar steps with slight changes can also be performed by the owners of other hoverboards as well. Keep in mind that you can adjust the board to both slow and fast speed using these steps.

  • Firstly place the strike on a side and power it on. This will lead to the illumination of red indicator light which is associated with advanced mode,
  • Then use the power button to scroll through various speed modes available on your device.
  • Finally, you can stop scrolling the modes when the indicator light illuminates in the color of your desired speed mode. Select it, and you are good to go.

How to Control a Fast Hoverboard?

Controlling a hoverboard can be challenging at times, especially if you’re a beginner and moving at a fast speed. You need to maintain balance while turning and moving forward at the same time. Thus, a detailed step by step guide is included in the article.

Step 1: Getting on the board

It might seem easy, but in reality, it is the most difficult step. Most riders often get injured when trying to get on the board. To prevent any mishap, it is advised to start with your right foot if you are right-handed. After you have stabilized yourself, you can place your left foot on the board as well. The procedure can be reversed if you are a left-handed person. However, it is recommended to perform the task swiftly as a slight delay might lead to a disbalance.

Step 2: Moving Forward and Backward

After you have maintained your balance on the board, it is time to move ahead. Keep in mind to ride on smooth surfaces that are free of obstacles for optimum output. Learn to move forward by applying pressure on your toes. It is essential to apply equal pressure on both feet to prevent a dangerous fall.

Once the forward position has been mastered, you can reverse the above-mentioned steps to move in the backward position. For this purpose, you are advised to apply pressure on your feet in the opposite direction. Remember to maintain the balance, or you might end up injuring yourself.

Step 3: Learning to Turn

The next step involves the procedure of efficiently turning your hoverboard. Never move your body in the direction you want to turn your board. You will end up shifting weight to one direction, and your board will overturn. Instead, you can keep moving in the forward direction and use your foot to exert more pressure in the direction you want to turn.

For example, right foot for the right side and vice versa. This will help you maintain balance while turning at the same time. For turning back, the same steps can be performed but be careful while doing so, as it is challenging to turn in a backward position.

Step 4: Getting off the Board

Before getting off, make sure that the board is completely stopped. Afterwards, reverse the steps you performed while getting on the board. Move one foot at a time while maintaining the balance on the board and surface. Do not try to jump off the board; it will only result in a mishap.

Frequently Asked Questions

How fast is the F1 hoverboard?

The GYROOR F1 hoverboard possesses a speed of 9.9 miles/hour and is constructed using ABS plastic. Hence, the unit is durable and can be operated at a fast speed without worrying about damaging it. It is admired by the majority of consumers due to its unrivaled features and fast speed.

Can you control your speed on a hoverboard?

It is not difficult to control the speed of a hoverboard. Most items are integrated with the default training mode that allows you to adjust the speed while riding. You can switch between various speeds whenever you ride. Similarly, you can always move back to normal mode when you want to ride at a slow speed.

How long do hoverboards last?

The majority of the high-quality and renowned hoverboards can last between 3 to 4 years after continuous use. After which, they might start displaying a reduction in speed, battery issues, and other performance concerns. Thus, it is recommended to properly maintain these gadgets for maximum output.

Related Buying Guides: Top Hoverboards under 200 | Hoverboards for kids

Wrapping Up

There are a variety of hoverboards available in the market and are renowned for their outstanding efficiency, speed, battery life, and weight carrying capacity. The maximum speed a unit can reach depends significantly on its power retention abilities and the rider’s weight. Additionally, the conditions for the road you are riding on should also be taken into account for extraordinary outcomes.

Based on all these above-mentioned requirements, the best tool available in the market is the GYROOR F1 hoverboard with a maximum speed reaching up to 9.9 mph. This is followed by Hovertrax DLX 2.0, Hovertrax 2.0, and Hovertrax 1.5 with the maximum speed of 9 mph, 8 mph, and 6 mph, respectively.

Photo of author
Charles is the co-owner of BudgetOrbit and manages all the technical aspects of the website. He's an eco-friendly commute advocate and has been interested in hoverboards and skateboards since his childhood.